PGIQ Rating v2 (reliability-adjusted) · as of June 2026

🇨🇭 Switzerland

Viable, with conditions, holding steady
Tier 3 Workable · Composite 54/100, #33 of 79 markets · Outlook Stable · Med confidence · how we score

Very clean (hydro and nuclear) but expensive and small; limited room for hyperscale.

See live grid data →

One market,
four reads

BuildTier 3Siting rating SellGrade BOfftake PlanLightLoad pressure MonitorNot coveredSiting screen only

The same market, four decisions. Open any lens to see this market ranked against the rest.

The same market, read four ways

BuildSellPlanMonitor

Switzerland is a moderate market to sell power into

Grade B (Moderate)

Offtake score 59/100

Demand 37, build feasibility 50, combined into the score. For a seller: where buyers already pay, how tight supply is, and how feasible new build is here.

See it on the Offtake Grade →

Switzerland: some room at system level, light demand pressure

Some room 60/100

System-level room, not local capacity

Local capacity: not assessed. We have found no operator publication of area or substation capacity for this market, so whether the bus serving a candidate site can take the load is an open question. Absence of a finding here is not evidence that capacity exists.

Two reads for a grid planner: how much room the system as a whole looks to have (Some room), and how hard demand is already pushing (Light). The first is a market-level estimate from connection ease, forward adequacy and reliability margin. It is not local deliverability. Capacity at a specific substation is not assessed for this market, and a market can look roomy while the bus you want has nothing available. Confirm local capacity with the utility before relying on it.

Demand growth

Slow load growth in our read, the pull on your system.

Load Pipeline Reality → Where demand is hungry → Connection friction →

Switzerland is not yet covered for a held exposure

SITING SCREEN ONLY

Switzerland is not yet monitored. Full monitoring needs reviewed reliability, connection-queue data and a compiled cost band; this market has only a subset, so we show it as a siting screen. We deepen coverage market by market.

See the markets we cover →

The five pillars behind the tier

The pillar signature: Access, Availability, Cost, Momentum, Carbon, taller is stronger. The same shape repeats across every market so peers compare at a glance.

Access30%50

Limited access on a small system.

Availability25%58

Moderate availability (hydro plus nuclear).

Cost25%56

Higher cost; import-reliant in winter.

Momentum15%35

Limited momentum.

Carbon5%95

Very clean (~30-45 g).

Default weights, which lean toward cost and access rather than carbon: Access 30 · Availability 25 · Cost 25 · Momentum 15 · Carbon 5. Momentum reflects the data-center build already underway, not just stated intentions.

Seller view: Read these the other way: momentum is your customer pipeline, cost is your revenue ceiling, and access is how hard it is to build and sell here, not only to connect.

Reliability overlay

Reliability reviewed: no material concerns were found, so the rating is unchanged. Reliability is reported as five separate layers, never as one combined label, because they answer different questions and a strong answer on one does not cover a gap in another: what has actually failed on the bulk system, what a forward assessment expects of firm supply, how the local network performs, what your contract actually promises, and what your site is designed to ride through. Any one of them can cap the tier.

Historical bulk-system performance: No reliability flags found

Modelled read: hydro and nuclear, very reliable, with some winter import reliance.

modelled

Historical utility-territory delivery performance: No reliability flags found

Average customer interruption (SAIDI) of 8 minutes per year in 2023, excluding major event days as filed.

measured · Swiss Electricity Commission (ElCom)

Role not yet declared. We have not recorded whether this is one operator’s filing or an average across several, so read it as context until we do. ElCom national average across Swiss grid operators. It is a territory-wide history and is silent on: performance at a specific substation or feeder; transmission-level service, which is a different product from distribution service; the industrial or large-load customer class specifically; N-1 or other redundancy architecture at the supplying substation; contractual curtailment (when a plant is told to stop feeding the grid) rights the utility may hold over the load; power quality and momentary interruptions, which this metric excludes by construction; on-site UPS, storage or generation; forward adequacy: it is a record of what happened, not a forecast.

Forward resource adequacy (assessed): No adequacy flags

Contractual service terms: not assessed

We have not compiled what firm service actually promises here: whether it is firm, non-firm or interruptible, the conditions under which you can be curtailed, the redundancy required of you, and the transfer time behind any N-1 commitment. Treat this as an open diligence item, not as an indication that service is firm.

Ask the utility for the tariff or service agreement terms before relying on firm supply.

Designed site resilience: not applicable at market level

Utility feeds, UPS, storage, on-site generation, islanding, black start and the residual energy you still expect to lose are properties of a specific site design, not of a market. This layer only exists once there is a site, and we never assert it for you.

Confidence: Low. Each input is labelled as measured, modelled, or drawn from a specific event, and is framed as a risk to a prospective large new load, not as a verdict on any utility or grid operator. Forward adequacy is an assessment of what is expected, not a measurement of what has happened; it is a forecast and is labelled as one.

Seller view: Tight forward capacity (firm supply promised for future years) is scarcity that firm generation and storage get paid for; an adequacy flag is a demand signal for new supply, not only a risk to a load.

Supply relief outlook

Will the power crunch ease before your load energizes? This nets the demand racing for capacity against the new supply likely to arrive and the old supply leaving. A cross-side read, using the same data a seller sees the other way.

Balanced

Demand pressure

Slow load growth competing for the same capacity.

What this means: Supply and demand look broadly balanced; the outcome hinges on the drivers below.

Reliability metrics

Delivery reliability (measured)

The average customer loses about 8.0 minutes of power per year (2023). This is the standard regulator outage measure (SAIDI); lower means a more reliable grid.

Source: Swiss Electricity Commission (ElCom)

Hard, cited measures behind the reliability overlay above: the regulator outage series (SAIDI, measured, published with a lag) and the forward resource-adequacy assessment (a measured forecast). Framed as risk to a prospective large new load, not a verdict on any utility.

Data provenance and freshness

What we hold for this market, field by field. Each tier below is assigned from the evidence actually held for that field, with provenance. A low tier means we looked and it is thin; it is not a verdict on the market.

cost: not_assessedconnection: not_assessedreliability: M2carbon: M2regulatory: not_assessedlocal capacity: not_assessed

Against a Standardized Project Case, these fields are not answered here at all: cost, connection. Absence of a finding is not evidence of low risk, and it is a different statement from a low tier.

Read against other uses: Discovery and monitoring: insufficient · Market comparison: insufficient · Project Case with a carbon requirement: insufficient · Conditional site diligence: insufficient.

Depth is not a rating strength, a confidence score or a feasibility conclusion. An aggregate is only ever shown for a named use case, and equals the lowest tier across that use case's required fields. Definitions v1.0. See the full coverage matrix.

How solid the data behind this rating is, on two separate axes plus recency. Source reliability is how measured the numbers are, as opposed to triangulated or modelled. Coverage is how many of the decision-relevant data dimensions (reliability, connection, and cost) are compiled for this market. The two are kept apart because they answer different questions: a market can have strong sources on the little that is covered, or broad coverage that still leans on models. Neither grades the rating itself. The rating is a cited opinion, graded separately and falsifiably by the public track record and baseline measurement plan.

Source reliability

High

1 of 1 data layers measured

Coverage

Partial

1 of 3 dimensions: reliability, connection, cost

Last reviewed

June 2026

per-layer vintages below

Layer	Method	Vintage	Freshness	Source
PGIQ Rating opinion	opinion	June 2026	Current	PGIQ methodology
Reliability	measured	2023	Fresh	Swiss Electricity Commission (ElCom)

Freshness reflects each layer's refresh cadence: reliability annual to three-yearly, capacity-auction and queue yearly, tariffs every year or two. The full cross-market freshness dashboard is at /data-quality.

What this market can and cannot answer yet

No market-level read closes a project case on its own, and saying only that would waste the evidence we do hold. Below is what is established, what is open, and what to do next.

What is established

Historical utility-territory delivery performance 8.0 minutes per year (2023)
Historical bulk-system performance (modelled)

What is open

Forward resource adequacy (assessed)
Contractual service terms (would change the answer)
Designed site resilience
cost evidence (would change the answer)
connection evidence (would change the answer)
regulatory evidence
local_capacity evidence

Who would actually serve you

Not compiled for this market. Identify the serving operator before relying on any figure here, because a market-level read is an average over territories.
Who runs the connection process: not yet compiled for this market. This is wayfinding rather than evidence, and its absence is a gap in our compilation, not a fact about the market.

Credible ranges today

No cost or schedule range is compiled for this market.

What could disqualify this market

Cost and scale.
Winter adequacy.

Five questions for the utility or system operator

What is the available capacity at the bulk supply point and substation that would serve this site, and what would a 100 MW request do to it?
Is firm service available at 100 MW, and what curtailment rights would you retain over us once we are energised?
What are the milestone dates from a complete application to full firm energisation, and which network upgrades would a 100 MW load trigger?
What is the all-in delivered rate for 100 MW at a 95% load factor, including demand, network and rider charges, under the tariff that would actually apply?
What is your own territory's SAIDI and SAIFI for the industrial class, on which major-event standard, and what redundancy serves the candidate substation?

Documents that would advance the case

The area or substation capacity study, and the current queue position list.
The applicable large-load tariff or the draft electric service agreement.
The interconnection or system impact study, and a specimen connection offer.
The current tariff sheet with all riders, and any large-load contract terms.
The utility's own reliability filing and the substation single-line diagram.

Outlook drivers

↑ Upgrade triggers

Hydro-backed clean supply.
Regional interconnection.

↓ Downgrade triggers

High cost and small scale.
Winter import reliance.

Key risks

Cost and scale.
Winter adequacy.

Peer comparison

Trades like

Austria (clean, small, pricey)

Ahead

on carbon

Behind

on cost and scale

🔔 Get alerts for Switzerland

Be notified the moment this market's PGIQ Rating, outlook, or a material development changes. Free while we validate demand.

Rating history

June 2026

New ratingNew rating: Tier 3 Workable assigned.

🔒 The full time series behind Switzerland, how its score, recurring cost, and interconnection queue (the line to connect to the grid) have moved month by month, is part of the Analyst Desk. The rating actions above are always free.

Every rating action is dated and explained, and the log is only ever added to, never edited. Reviews happen on a regular schedule and whenever a significant event occurs. "Affirmed" means we reviewed a development and the tier held; "Under review" means a significant item is being assessed and the rating could change.

Score history

How Switzerland's reliability-adjusted score and tier have moved, month by month. Part of your Analyst Desk.

Loading history…

How does Switzerland compare to the other 78 markets?

This page is our full read on Switzerland alone, and it is free. To decide where a large load should actually go, you need every market side by side, ranked on recurring cost and time-to-connect, with the history and alerts when your shortlist moves. That is the Analyst Desk.

With your Analyst Desk, compare Switzerland against every market side by side, ranked on recurring cost and time-to-connect, with the full history and shortlist alerts.

+ Add to your shortlist Recurring cost, ranked Connection friction, ranked Get the Analyst Desk →

Cite as: PowerGridIQ Rating, "Switzerland" (Tier 3 Workable), as of June 2026. A proprietary, directional screen for siting a large electricity load; not a connection guarantee, and not investment, engineering or procurement advice. Sources and methodology at powergridiq.com/methodology. © PowerGridIQ.